Viewing The Statistics - TP-Link TL-R470T Plus Configuration Manual

Configuring Network
IPTV VLAN
Priority
IPTV Multicast
VLAN ID
IPTV Multicast
VLAN Priority
3) Specify the service to support for the LAN port.
Port Mode
Note:
Among the WAN ports, only WAN 1 supports IPTV service. So if you want to use IPTV function,
•
connect your ISP network to WAN 1.
In Bridge mode, after you have saved the configuration, the router will automatically and ran-
•
domly create some VLANs for WAN 1 and the LAN ports. These VLANs will be displayed on the
VLAN page.
In Custom mode, after you configured the VLAN IDs of different services, these VLANs will
•
automatically be created, and port 1 (WAN 1) will automatically be added to the IPTV VLAN and
Internet VLAN. These VLANs will be displayed on the VLAN page.
Enter the VLAN priority of the IPTV service. It is provided by your ISP.
Enter the VLAN ID of the IPTV multicast service. It is provided by your ISP.
Enter the VLAN priority of the IPTV multicast service. It is provided by your ISP.
Specify the service to be supported by the LAN port.
Internet: Specify the port to support only Internet service. If you want to surf the
internet, you should connect your host to this port.
IP-Phone: Specify the port to support only IP-Phone service. If you want to make
an IP-Phone call, you should connect your IP-Phone to this port.
IPTV: Specify the port to only support IPTV service. If you want to use IPTV, you
should connnect your IPTV set-top box to this port.
IPTV Configuration
Configuration Guide 28