System Tools
DST Status
Mode
Time Offset
Starting Time
Ending Time
6.2.3 Date Mode
Choose the menu System Tools > Time Settings > Time Settings to load the following
page.
Figure 6-5 Date Mode Page
In the Daylight Saving Time section, select one predefined DST schedule and click Save.
DST Status
Mode
Time Offset
Starting Time
Ending Time
Check the box to enable the DST function.
Select Recurring Mode to specify a cycle time range for the daylight saving time. This
configuration will take effects every year.
Specify the time added in minutes when Daylight Saving Time takes effect.
Specify the starting time of Daylight Saving Time. The starting time is relative to
standard time.
Specify the ending time of Daylight Saving Time. The ending time is relative to daylight
saving time.
Check the box to enable the DST function.
Select Date Mode to specify an absolute time range for the daylight saving time.
Specify the time added in minutes when Daylight Saving Time takes effect.
Specify the starting time of Daylight Saving Time. The starting time is relative to
standard time.
Specify the ending time of Daylight Saving Time. The ending time is relative to daylight
saving time.
Time Settings
Configuration Guide
169