Onekey Online Configuration; Configuring The Authentication Page - TP-Link TL-R470T Plus Configuration Manual

Configuring Authentication
4

Onekey Online Configuration

In Onekey Online authentication, users only need to click the "Onekey online" button on the
authentication page, then can access the internet. The username and password are not
required.

4.1 Configuring the Authentication Page

Choose the menu Authentication > Authentication Settings > Web Authentication to
load the following page.
Figure 4-1 Configuring the Web Authentication
Follow these steps to configure Onekey Online Authentication:
1) In the Settings section, enable the authentication status, configure the idle timeout and
portal authentication port.
Status
Idle Timeout
Check the box to enable portal authentication.
Specify the idle timeout. The client will be disconnected after the specified
period (Idle Timeout) of inactivity, and is required to be authenticated again.
Value 0 means the client will always keep online until the authentication timeout
leased, even if the client remains inactive.
Onekey Online Configuration
Configuration Guide 134