Configuring The Policy Routing - TP-Link TL-R470T Plus Configuration Manual

Configuring Transmission
Metric
Description
Status
6.2

Configuring the Policy Routing

Choose the menu Transmission> Routing > Policy Routing and click Add to load the
following page.
Figure 6-2 Configuring the Policy Routing
Specify the name of the policy routing entry and configure other related parameters. Then
click OK.
Name
Service Type
Source IP
Destination IP
WAN
Effective Time
Description
Status
Define the priority of the route. A smaller value means a higher priority. The default
value is 0. It is recommended to keep the default value.
Enter a brief description for the rule.
Check the box to enable the rule.
Enter a name for the policy routing entry.
Specify the service type for the rule.
Enter the source IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
Enter the destination IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
Specify the effective port for the rule.
Specify the effective time for the rule.
Enter a brief description for the rule.
Check the box to enable the rule.
Routing Configurations
Configuration Guide 71