Radius Authentication Configuration; Configuring Radius Authentication - TP-Link TL-R470T Plus Configuration Manual

Configuring Authentication
3

Radius Authentication Configuration

To configure Radius Authentication, follow the steps:
1) Configure the authentication page.
2) Specify the external Radius server and configure the corresponding parameters.
3.1

Configuring Radius Authentication

Choose the menu Authentication > Authentication Settings > Web Authentication to
load the following page.
Figure 3-1 Configuring the Radius Authentication
Follow these steps to configure Radius Authentication:
1) In the Settings section, enable the authentication status, configure the idle timeout and
portal authentication port.
Status Check the box to enable portal authentication.
Radius Authentication Configuration
Configuration Guide 131