Configuring The Url Type - TP-Link TL-R470T Plus Configuration Manual

Configuring Authentication
Note:
In a Guest Resource entry, if some parameter is left empty, it means the router will not restrict that
parameter. For example, if the source IP range is left empty, it means all the clients can visit the
specified guest resources.

5.2 Configuring the URL Type

Choose the menu Authentication > Authentication Settings > Guest Resources and click
Add to load the following page.
Figure 5-1 Configuring the URL
Specify the client and the network resources the client can visit by configuring the URL of
the network resource and the parameters of the clients, then click OK.
Name
Type
URL Address
Source IP Range
Source MAC
Address
Source Port
Range
Enter the name of the guest resource entry.
Choose the guest resource type as URL Type.
Enter the URL address or IP address of the network resource that can be visited for
free.
Configure the IP range of the client(s) by entering the network address and subnet
mask bits.
Enter the MAC address of the client.
Enter the source service port range.
Guest Resources Configuration
Configuration Guide 138