TP-Link TL-R470T Plus Configuration Manual page 136

Configuring Authentication
Maximum Users
Upstream
Bandwidth /
Downstream
Bandwidth
Name
Telephone
Description
Status
 Configuring the Free User Account
Choose the menu Authentication > User Management > User Management and click Add
to load the following page.
Figure 2-3 Configuring the Free User Account
Specify the user type, configure the username and password for the free user account, and
configure the other corresponding parameters. Then click OK.
User Type
Specify the maximum number of users that are allowed use this account to
authenticate.
Note: If the MAC Binding Type is either Static Binding or Dynamic Binding, only one
client can use this username and password to authenticate,i.e., the bound client,
even if the value of Maximum Users is configured to be greater than one.
Optional. Specify the upstream / downstream bandwidth for the user. 0 means no
limit.
Optional. Record the user's name.
Optional. Record the user's telephone number.
Optional. Enter a brief description for the user.
Check the box to enable this account.
Specify the user type as Free User.
Local Authentication Configuration
Configuration Guide 129