Configuring Behavior Control
2.1.2 Configuring URL Filtering
Before configuring URL Filtering, go to the Preferences module to configure the IP Group
and Effective Time according to your needs.
Choose the menu Behavior Control > Web Filtering > URL Filtering and click Add to load
the following page.
Figure 2-3 URL Filtering Page
Follow the steps below to configure URL filtering:
1) In the URL Filtering List section, click Add and configure the required parameters. Click OK.
IP Group
Policy
Select an IP group for the rule. The IP group referenced here can
be created on the Preferences > IP Group page.
Choose to allow or deny the websites that match the filtering
content.
Behavior Control Configuration
Configuration Guide
110