Overview; Supported Features - TP-Link TL-R470T Plus Configuration Manual

Configuring Network
1

Overview

The Network module provides basic router functions, including WAN connection, DHCP
service, VLAN, IPTV service and more.

1.1 Supported Features

WAN
The router can provide a maximum of four WAN ports. Each WAN port has its own internet
connection, providing link backup and load balancing.
LAN
For LAN configuration, you can configure the LAN IP address and DHCP (Dynamic Host
Configuration Protocol) server. With its DHCP server enabled, the router can automatically
assign IP addresses to hosts in the LAN.
IPTV
IPTV services is based on the Internet protocol, rather than through traditional satellite
signal or cable transmission.
The router supports three kinds of IPTV configuration according to your ISP：
 IPTV based on IGMP.
 IPTV in Bridge mode.
 IPTV in Custom mode.
MAC
You can change the default MAC address of the WAN port or LAN port according to your
needs.
Switch
The router supports some basic switch port management functions, like Flow Control and
Port Negotiation, to help you to monitor the traffic and manage the network effectively.
VLAN
The router supports 802.1Q VLAN, which can divide the LAN into multiple VLANs, helping
to manage the network more effectively.
IPv6
You can set up an IPv6 internet connection if your ISP provides IPv6 service.
Overview
Configuration Guide 8