Lcr Configuration - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

Chapter 20 LCR

Table 108 Outbound Line Management > LCR (continued)

Add/Edit/Delete Click Add to create a new LCR.

20.2.1 LCR Configuration

Use this screen to choose the outbound line groups and create dialing conditions

for an LCR. To access this screen, click the Add or Edit icon in the Dial Condition

List section of the LCR screen to view the screen as shown.

Note: Only the Add LCR screen is shown. In the Edit LCR screen, some of the fields

are read-only.

Before you configure any dial conditions for an LCR, you must first configure

the LCR Setting section of this screen and click Apply.

Figure 181 LCR > ezout

Each field is described in the following table.

Table 109 LCR > ezout

Click this button to save your LCR sequence after re-arranging it.

Click Edit to change the settings of an existing LCR.

Click Delete to remove an existing LCR.

Type a short name to identify this outbound dialing rule (LCR). You can

use letters "a-z", "A-Z", numbers "0-9" and the underscore "_"

character. Spaces are not allowed.

X6004 User's Guide