Connecting To A Computer Using Usb; Connecting To A Wired Network; Connecting To A Wireless Network - Xerox versalink C7020 User Manual

Color multifunction printer
Hide thumbs Also See for versalink C7020:
Table of Contents

Advertisement

Connecting to a Computer Using USB

Windows 7, Windows 8.1, Windows Server 2008, Windows 10, Windows Server 2008 R2, and
Windows Server 2012.
Macintosh OS X version 10.10 and later.
UNIX and Linux: Your printer supports connection to various UNIX platforms through the network
interface.
To connect the printer to the computer using a USB cable:
Connect the B end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of the
1.
printer.
Connect the A end of the USB cable to the USB port on the computer.
2.
3.
If the Windows Found New Hardware Wizard appears, cancel it.
4.
Install the print driver.
For more information, refer to

Connecting to a Wired Network

1.
Ensure that the printer is powered off.
2.
Attach a Category 5 or better Ethernet cable from the printer to the network or router socket.
Use an Ethernet switch or router, and two or more Ethernet cables. Connect the computer to the
switch or router with one cable, then connect the printer to the switch or router with the second
cable. Connect to any port on the switch or router except the uplink port.
3.
Attach the power cord, then plug in the printer and turn it on.
4.
Set the network IP printer address, or set up the printer for automatic printer IP detection. For more
information, refer to the System Administrator Guide at www.xerox.com/office/VLC70XXdocs.

Connecting to a Wireless Network

A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID) and any necessary credentials.
Note:
Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.
Installing the Software
Xerox
VersaLink
C7020/C7025/C7030 Color Multifunction Printer
®
®
on page 57.
Getting Started
49
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versalink c7025Versalink c7030

Table of Contents