Xerox versalink C7020 User Manual page 53

CAUTION:
Do not use force to pull on the Wireless Network Adapter. If the latch is released
properly, the adapter pulls out easily. Pulling on the adapter can damage it.
3. Connect the printer to your computer with a USB cable or to the network with an Ethernet cable.
4. Power on the printer:
a. Open the front door, then press the power switch to the On position.
At the printer control panel, press the Power/Wake button.
b.
Note: If the printer was installed previously in a wireless network environment, it could retain setup
and configuration information from that environment. To prevent the printer from attempting to
connect to the previous network, reset the wireless settings. For more information, refer to the
System Administrator Guide at www.xerox.com/office/VLC70XXdocs.
Xerox VersaLink C7020/C7025/C7030 Color Multifunction Printer
® ®
Getting Started
53
User Guide