Troubleshooting
3.
Hold the tabs on both sides of the staple cartridge, then pull the cartridge out of the finisher.
4.
To remove any jammed staples, pull them in the direction shown.
5.
Hold the tabs on both sides of the staple cartridge, then reinsert the staple cartridge into the
original position in the finisher.
Note:
The booklet maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
6.
Repeat the procedure for the other staple cartridge.
7.
Close the finisher side cover.
248
Xerox
VersaLink
®
User Guide
C7020/C7025/C7030 Color Multifunction Printer
®