Xerox versalink C7020 User Manual page 190

Paper and Media
Loading Labels in Tray 6
1. Pull out Tray 6 from the high-capacity feeder until it stops. Open the side gate until it stops.
2. Wait for the tray to lower and stop.
Note: Ensure that labels are the correct size for the tray. Do not load custom-size paper into Tray 6.
3. To load labels in the tray, insert labels face up with the top edge toward the back. Stack the labels
against the right side of the tray as shown.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause paper jams.
4. Close the tray door.
5. At the control panel, select the correct paper type and color. Ensure that the paper type is set to
Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to
Tray Settings on page 163.
To confirm the settings, touch OK.
6.
7. To return to the Home screen, press the Home button.
190 Xerox VersaLink
®
User Guide
C7020/C7025/C7030 Color Multifunction Printer
®
Configuring