Troubleshooting
Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Lines or streaks only present in copies made
from the document feeder.
Spots present in copies taken from the
document glass.
Image is too light or too dark.
Image quality is poor when scanning color
original documents.
Colors are inaccurate.
If the problem persists, for online support information, go to www.xerox.com/office/VLC70XXsupport.
256
Xerox
VersaLink
®
User Guide
Solutions
There is debris on the CVT glass. When scanning, the paper from
the document feeder passes over the debris on the glass surfaces,
resulting in lines and streaks. Clean all glass surfaces with a
lint-free cloth dampened with water. For details, refer to
the Scanner
There is debris on the document glass. When scanning, the debris
creates a spot on the image. Clean all glass surfaces with a
lint-free cloth dampened with water.
Adjust the lighten/darken setting.
For best results, select Black & White output.
• Adjust color settings and confirm that the correct Original
• Perform the Scan Color Consistency procedure. For details,
C7020/C7025/C7030 Color Multifunction Printer
®
on page 193.
Type is set.
refer to
Color Registration
on page 213.
Cleaning