Configuring Tray 6 - Xerox versalink C7020 User Manual

Configuring Tray 6

Tray 6 is a dedicated high-capacity feeder. You can configure Tray 6 to support the paper size that you
will use. For details on supported paper sizes, refer to
To configure Tray 6:
Note: Before you make any tray adjustments, compare the paper size to the current Tray 6
configuration. If the paper size matches the tray configuration, no tray adjustment is needed.
1. Remove the screw that holds the spacer plate at the back of the tray.
2. To remove the spacer plate, grasp the spacer plate and lift upward.
3. Place the tabs at the bottom of the spacer plate into the slots in the bottom of Tray 6 that
correspond with the paper size.
Supported Standard Paper Sizes
Xerox VersaLink C7020/C7025/C7030 Color Multifunction Printer
® ®
Paper and Media
on page 160.
165
User Guide