Loading Paper In Tray 6 - Xerox versalink C7020 User Manual

Loading Paper in Tray 6

The control panel displays a warning message when the paper in the tray is in short supply, or when the
tray is empty.
To change the paper size in Tray 6, refer to
1. Pull out Tray 6 from the high-capacity feeder until it stops. Open the side gate until it stops.
2. Wait for the tray to lower and stop.
3. The control panel displays the paper tray settings. Ensure that you load the correct paper type into
the tray.
Note: Do not load custom-size paper into Tray 6.
4. Fan the edges of the paper before loading it into the paper trays. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until necessary.
5. Load the paper against the right side of the tray.
− Place letterhead or pre-printed paper face up with the top edge toward the back of the tray.
− Place hole-punched paper with the holes toward the left side of the tray.
Configuring Tray 6
Xerox VersaLink C7020/C7025/C7030 Color Multifunction Printer
® ®
on page 164.
Paper and Media
177
User Guide