Printing Overview - Xerox versalink C7020 User Manual

Printing

Printing Overview

Before you print, ensure that your computer and the printer are plugged in, powered on, and connected
to an active network. Ensure that you have the correct print driver software installed on your computer.
For details, refer to Installing the Software
This printer has PCL enabled by default. To use PostScript, purchase and install the feature. For details,
contact your local Xerox representative.
Notes:
• Not all options described are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, print driver type.
• The Windows PostScript print driver and the Macintosh print driver provide the widest range of
features.
To send a job to the printer:
1. Select the appropriate paper.
2. Load paper in the appropriate tray. At the printer control panel, specify the paper size, color, and
type.
3. Access the print settings in your software application. For most software applications, press CTRL+P
for Windows, or CMD+P for Macintosh.
4. Select your printer.
To access the print driver settings, for Windows, select Printer Properties, Print Options, or
5.
Preferences. For Macintosh, select Xerox
your application.
6. Modify the print driver settings as necessary, then click OK.
To send the job to the printer, click Print.
7.
Note: To print a file stored on a USB Flash drive, refer to
For reference:
Loading Paper on page 168
Printing Features on page 142
Printing on Both Sides of the Paper
Printing on Special Paper
128 Xerox VersaLink
®
User Guide
on page 57.
®
on page 143
on page 179
C7020/C7025/C7030 Color Multifunction Printer
®
Features. The title of the button can vary depending on
USB on page 117.