Xerox versalink C7020 User Manual page 252

Troubleshooting
Symptom
The output is too light.
Only one color is faded.
Color around the edge of printing is
incorrect.
White lines or streaks running
through only one color.
252 Xerox VersaLink
®
User Guide
Solutions
• To check the toner level, check the control panel, use the print driver, or
the Embedded Web Server. If the toner cartridge is near empty,
replace it.
• Verify that the toner cartridge is approved for use in this printer, and
replace it as needed. For best results, use a genuine Xerox toner
cartridge.
• Replace the paper with a recommended size and type, then confirm
that your printer and print driver settings are correct.
• Verify that the paper is dry and that supported paper is used. If not,
change the paper.
• Change the Paper Type settings in the print driver. In the print driver,
on the Printing Options tab, select Paper, then change the Other Type
setting.
Check the condition of the toner cartridge and replace it if necessary.
Adjust the color registration. For details, refer to
page 213.
Clean the lens for the affected color. For details, refer to
Printhead Lenses
C7020/C7025/C7030 Color Multifunction Printer
®
on page 195.
Color Registration on
Cleaning the