UART Mode Select
Select an operating mode for the second serial port:
Normal
IrDA
ASK IR
UART2 Duplex Mode
In an infrated port mode, this field appears. Full-duplex mode
permits simultaneous two-direction transmission. Half-duplex
mode permits transmission in one direction only at a time. Select
the value required by the IR device connected to the IR port.
The choices: Full, Half.
RxD, TxD Active
Please consult your IR peripheral documentation to select the
correct setting of the TxD and RxD signals.
The choices: Hi, Hi / Hi,Lo / Lo,Hi / Lo,Lo.
IR Transmission Delay
Please choose "Enabled" to add more stability for the system.
The choices: Enabled, Disabled.
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for
the physical parallel port
The Choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.
RS-232C serial port
Infrared port compliant
Amplitude shift keyed infrared port
Chapter 3 Award BIOS Setup
57