Advanced Chipset Features
Auto Configuration
Auto Configuration selects predetermined optimal values of
chipset parameters. When "Disabled", chipset parameters revert to
setup information stored in CMOS. Many fields in this screen are
not available when Auto Configuration is "Enabled".
The choices: Enabled, Disabled.
EDO DRAM Speed Selection
The value in this field must correspond to the speed of the DRAM
installed in your system. "DO NOT" change the default setting of
this field, as determined by the system board manufacturer for the
installed DRAM. This value is access speed, so a lower value
means a faster system. This field applies only if EDO DRAM is
installed in the system.
The choice: 60ns, 50ns.
Chapter 3 Award BIOS Setup
49