Features - Aaeon Gene-6320 Manual

Intel pentium iii low-power consumption subcompact board with lcd, lvds, ethernet, tv-out, audio and cfd.
Table of Contents

Advertisement

Features

3.5" FDD SubCompact Form Factor
Supports Mobile Intel Celeron (ULP) or Mobile Intel
Pentium III (LP) processor
Integrated AGP 2X 2D/3D Graphics Accelerator
Supports CRT and 24-bit TFT/DSTN panels
Integrated one channel LVDS interface onboard
Supports NTSC/PAL TV output
Integrated SoundBlaster-compatible PCI audio (optional)
Supports Compact Flash Storage
Supports 10 /100Base-T Fast Ethernet (GbE is optional)
(Dual Ethernet is available but without audio function)
2 COMs / 1 Parallel / 2 USBs / 1 IrDA Port
5V only operation
Notice
1. Due to the memory addressing limitation of North bridge,
82443BX, and chipset, be sure that SODIMM memory configura-
tion (can be found in SODIMM memory module datasheet) is arranged
as the following description before you install 256MB memory:
16Mb x 8(single memory chip) x 8(pcs/side) x 2 side = 256MB
Or
16Mb x 16(single memory chip) x 4(pcs/side) x 2 side = 256MB
Otherwise system may detect 128MB only.
2. GENE-6320 series adapt SMI722 integrated TV-output encoder.
Owing to the chipset limitation, it can only support AV-terminal jack
output (CN9, pin-2, 4, 6,and 8). For S-terminal video output, Silicon
Motion Inc. would release revised software when the function is
ready. Please contact AAEON for the latest driver update.
4
Gene-6320 User Manual

Advertisement

Table of Contents
loading

Table of Contents