Onboard Fdc Controller; Uart Mode Select - Aaeon SBC-659P User Manual

KB Power on Password
The system will ask for a password, after entering the correct
password the keyboard can then be used.
Hot Key Power On
Simply pressing on the pre-selected keyboard key the system will
power on.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you install
an add-in FDC or the system has no floppy drive, select Disabled
in this field.

UART Mode Select

Select an operating mode for the second serial port:
Normal
IrDA 1.0
IrDA SIR
IrDA MIR
IrDA FIR
ASK IR
SCR
60 SBC-659P User Manual
RS-232C serial port
Infrared port compliant with IrDA 1.0
specification
IrDA-compliant serial infrared port
1 MB/sec infrared port
Fast infrared standard
Amplitude shift keyed infrared port