1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. GENE-6315
  6. User manual

Aaeon GENE-6315 User Manual

Subcompact board
Hide thumbs
Table of Contents

Advertisement

Quick Links

S u b C o m p a c t B o a r d
G E N E - 6 3 1 5
GENE-6315
Onboard VIA Mark
533/800MHz Processors
Up to 36-bit TTL/LVDS TFT LCD
144-pin SDRAM SODIMM Memory
AC-97 2.0 Codec with S/P DIF
2USB 2.0 / 2 USB1.1 / 4 COM
GENE-6315 Manual Rev.A 2nd Ed.
Jan. 2007

Advertisement

Table of Contents
loading

Related Manuals for Aaeon GENE-6315

Summary of Contents for Aaeon GENE-6315

  • Page 1 G E N E - 6 3 1 5 GENE-6315 Onboard VIA Mark 533/800MHz Processors Up to 36-bit TTL/LVDS TFT LCD 144-pin SDRAM SODIMM Memory AC-97 2.0 Codec with S/P DIF 2USB 2.0 / 2 USB1.1 / 4 COM GENE-6315 Manual Rev.A 2nd Ed. Jan. 2007...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™...

  • Page 4: Packing List

    G E N E - 6 3 1 5 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 GENE-6315 CPU Card • 1 Quick Installation Guide • 1 CD-ROM for manual (in PDF format) and drivers •...

  • Page 5: Table Of Contents

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-4 1.3 Specifications ............1-5 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.18 Floppy Connector (CN6) ......... 2-17 2.19 Front Panel Connector (CN7) ......... 2-18 2.20 COM2 RS-232/422/485 Serial Port Connector (CN9) ..................
  • Page 7 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Chapter 4 Driver Installation 4.1 Installation ..............4-3 Appendix A Programming the Watchdog Timer A.1 Programming ............A-2 Appendix B I/O Information B.1 I/O Address Map ............B-2 B.2 Memory Address Map..........B-3...

  • Page 8: Chapter 1 General Information

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    Moreover, GENE-6315 configures 2 USB 2.0, 2USB 1.1, 8-bit Digital I/O and 4 COM ports. These multiplex functions offered by GENE-6315 provide an excellent advantage to customers who have system expansion limitations. For multimedia applications, GENE-6315’s display supports CRT/LCD, CRT/TV &...
  • Page 10 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 improved the performance of thermal spreading. AAEON has a thorough solution for it and customers need not worry about the heat spreading system when utilizing the GENE-6315.

  • Page 11: Features

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 1.2 Features Onboard VIA Mark Series Processors Supports Up to 36-bit TTL/LVDS TFT LCD Supports SODIMM SDRAM PC-133 Memory Up to 1GB Supports CompactFlash Type II 2 USB 2.0/ 2 USB 1.1/ 8-bit Digital I/O/ 4 COM Supports PCI-104...

  • Page 12: Specifications

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 1.3 Specifications System Onboard VIA Mark 533/800 MHz Processor (FSB 100/133MHz) System Memory 1 x 144-pin SDRAM SODIMM, Max.
  • Page 13 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Display: Supports CRT/LCD, CRT/TV & LCD/TV Simultaneous display Chipset VIA Mark + TI SN75LVDS83 Memory Shared system memory up to 32MB Resolutions Up to 1600x1200@24bpp for...

  • Page 14: Chapter 2 Quick Installation Guide

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation...

  • Page 15: Safety Precautions

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 16: Location Of Connectors And Jumpers

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.2 Location of Connectors and Jumpers Component Side 2- 3 Chapter 2 Quick Installation Guide...
  • Page 17 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Solder Side 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 18: Mechanical Drawing

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.3 Mechanical Drawing Component Side 2- 5 Chapter 2 Quick Installation Guide...
  • Page 19 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Solder Side 2 - 6 Chapter 2 Quick Installation Guide...

  • Page 20: List Of Jumpers

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 21: List Of Connectors

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 22 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 PS2 Keyboard/Mouse Connector CN20 VGA Display Connector CN21 CN22 CompactFlash Slot CN23 Option PME Connector CN24 COM3 RS-232 Serial Port Connector CN25 COM4 RS-232 Serial Port Connector...

  • Page 23: Setting Jumpers

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 24: Lvds Power Selection (Jp1)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.7 LVDS Power Selection (JP1) Function +3.3V (Default) 2.8 PCI Signaling Voltage (VI/O) Selection (JP4) Function +3.3V (Default) 2.9 Clear CMOS (JP5) Function...

  • Page 25: Atx Power/ At Power (Jp7)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.11 ATX Power/ AT Power (JP7) Function N.C. ATX (Default) 2.12 COM2 Ring/+5V/+12V Selection (JP8) Function +12V Ring (Default) 2.13 EIDE Connector (CN1)

  • Page 26: Tv_Out Connector (Cn2)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 IO WRITE IO READ IO READY DACK IRQ14 ADDR1 UDMA DETECT ADDR0 ADDR2 CS#1 CS#3 2.14 TV_Out Connector (CN2) Signal Signal CVBS...

  • Page 27: Fan Connector (Cn3)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.15 Fan Connector (CN3) Signal Speed Sense 2.16 TTL-LCD Connector 1 (CN4) For 18-bit/ Channel 1 36-bit TTL-LCD Signal Signal +3.3V...
  • Page 28 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 RED0-0 RED0-1 RED0-2 RED0-3 RED0-4 RED0-5 DOT_CLOCK VSYNC HSYNC N.C. ENAVEE For 24-bit TTL-LCD Signal Signal +3.3V +3.3V ENBKL...

  • Page 29: Ttl- Lcd Connector 2 (Cn5)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 RED0-4 RED0-5 RED0-6 RED0-7 DOT_CLOCK VSYNC HSYNC N.C. ENAVEE Note: If you need to use a 36-bit TTL LCD, please plug your cable into both CN4 and CN5.

  • Page 30: Floppy Connector (Cn6)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.18 Floppy Connector (CN6) Signal Signal #REDWC #DS1 #INDEX #MOTOR A #DRIVE SELECT B #DRIVE SELECT A #MOTOR B #DIR #STEP...

  • Page 31: Front Panel Connector (Cn7)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.19 Front Panel Connector (CN7) Signal Signal Power On Button(-) Power On Button(+) IDE LED(-) IDE LED(+) External Buzzer(-) External Buzzer(+) Power LED(-)

  • Page 32: Battery Connector (Cn12)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 DATA1 #INIT DATA2 #SLIN DATA3 DATA4 DATA5 DATA6 DATA7 #ACK BUSY SELECT 2.22 Battery Connector (CN12) Signal Signal 2.23 Audio Connector (CN13)

  • Page 33: At Power Connector (Cn15)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 LINE_IN_GND CD_IN_R LINE_OUT_L LINE_OUT_R LINE_OUT_GND LINE_OUT_GND 2.24 AT Power Connector (CN15) Signal Signal +12V 2.25 USB Connector (CN16) (Supports USB 2.0/1.1) Signal Signal USBD1-...

  • Page 34: Com1 Rs-232 Serial Port Connector (Cn18)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 USBD3+ USBD4+ USBD4- 2.27 COM1 RS-232 Serial Port Connector (CN18) Signal Signal 2.28 IrDA Connector (CN19) Signal IRRX IRTX...

  • Page 35: Vga Display Connector (Cn21)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.29 VGA Display Connector (CN21) Signal Signal GREEN BLUE N.C. DDCDAT HSYNC VSYNC DDCCLK 2.30 Option PME Connector (CN23) Signal +5VSB #PME...

  • Page 36: Com3 Rs-232 Serial Port Connector (Cn24)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 2.31 COM3 RS-232 Serial Port Connector (CN24) Signal Signal N.C. 2.32 COM4 RS-232 Serial Port Connector (CN25) Signal Signal N.C.

  • Page 37: Digital I/O Connector (Cn27)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 PS-ON +5VSB 2.34 Digital I/O Connector (CN27) Signal Signal DIO-1 DIO-2 DIO-3 DIO-4 DIO-5 DIO-6 DIO-7 DIO-8 Address Table SET1 280H (Default)

  • Page 38: Spdif Connector (Cn28)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 DIO1-5 CN27 Pin 5 GP2_Bit 0 U30 Pin 69 (GP20) DIO1-6 CN27 Pin 6 GP2_Bit 1 U30 Pin 70 (GP21) DIO1-7 CN27 Pin 7 GP2_Bit 2 U30 Pin 72 (GP22)

  • Page 39: 24-Bit Lvds Connector (Cn31)

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 CH2_LVDS_TX1- CH2_LVDS_TX1+ CH2_LVDS_TX2- CH2_LVDS_TX2+ N.C. N.C. PPVCC CH2_LVDS_TXCLK- CH2_LVDS_TXCLK+ 2.37 24-bit LVDS Connector (CN31) Signal Signal ENBKL N.C.

  • Page 40: Chapter 3 Award Bios Setup

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Chapter Award BIOS Setup Chapter 3 Award BIOS Setup 3-1...
  • Page 41 3. The CMOS memory has lost power and the configuration information has been erased. The GENE-6315 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.
  • Page 42 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 43 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals.
  • Page 44 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter.

  • Page 45: Chapter 4 Driver Installation

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 46 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 The GENE-6315 comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 47 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 4.1 Installation: Insert the GENE-6315 CD-ROM into the CD-ROM drive and install the drivers from Step 1 to Step 5 in order. Step 1 – Install System Driver 1.
  • Page 48 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Step 4 – Install Audio Driver 1. Click on the Step 4 – Audio folder 2. Double click on Setup file 3.

  • Page 49: Appendix A Programming The Watchdog Timer

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 50: Programming

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 A.1 Programming GENE-6315 contains a watchdog timer reset pin. (GP16) All reference material can be found on the following pages. ==================================================*...
  • Page 51 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 /* Set I/O Address : 370/371 or 3F0/3F1 */ #define IO_INDEX_PORT 0x370 #define IO_DATA_PORT 0x371 /* Set Watchdog reset pin : 12/13/16 */ #define watch_dog_output_GP 16 #define UNLOCK_DATA 0x87...
  • Page 52 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 outportb(IO_INDEX_PORT, LOCK_DATA); void SelectDevice(unsigned char device) outportb(IO_INDEX_PORT, DEVICE_REGISTER); outportb(IO_DATA_PORT, device); unsigned char ReadAData(short int reg) outportb(IO_INDEX_PORT, reg); return (inportb(IO_DATA_PORT));...
  • Page 53 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 void SetWatchDogTime(unsigned char time_val) EnterConfigMode(); SelectDevice(8); //Set Register F2 //Set Watch-Dog Timer 1~ 256 WriteAData(0xF2, time_val); // set counter counts in second (or minute) // Register F4 Bit 6 = 0/1 (minutes/seconds) // For w83977EF only...
  • Page 54 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 short int value; //Enter W83977 Configure Mode EnterConfigMode(); //Select Device 7 SelectDevice(7); //Set Device Active WriteAData(0x30, 0x01); //caution:skip this step will be a mistake!! if (watch_dog_output_GP==12) //Set Register E2 to define GP12...
  • Page 55 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 WriteAData(0xE3, 0x0A); else if(watch_dog_output_GP==16) //Set Register E6 to define GP16 WriteAData(0xE6, 0x0A); //Select Device 8 SelectDevice(8); //Set Register F3 //keyboard and mouse interrupt reset Enable //When Watch-Dog Time-out occurs,Enable POWER LED output...
  • Page 56 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 WriteAData(0x2A,ReadAData(0x2A)|0x80); else if(watch_dog_output_GP==13) //Set Register 2B (PIN 58) Bit 0 = 0/1 (KBLOCK/GP13) //set to GP13 for WD Rst WriteAData(0x2B,ReadAData(0x2B)|0x01);...
  • Page 57 *ptr; printf(“winBond 83977 WatchDog Timer Setup Utility Version 1.0 \n" ); printf(“Ccopyright (c) 2000 AAEON Technology Inc.\n"); printf(“Tthis version only for W83977 that using GP%d to Reset System.\n",watch_dog_output_GP); if (argc == 1) printf(“\n Syntax: WATCHDOG [time] \n" );...
  • Page 58 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 time_value = atoi(ptr); if (time_value > 0 && time_value < 256) SetWatchDogTime((unsigned char) time_value); init_w83977tf_aw_watchdog(); printf(“Watch Dog Timer set up : %d \n",time_value); A-10 Appendix A Programming the Watchdog Timer...

  • Page 59: Appendix B I/O Information

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Appendix I/O Information Appendix B I/O Information...

  • Page 60: I/O Address Map

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 B.1 I/O Address Map Appendix B I/O Information...

  • Page 61: Memory Address Map

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 B.2 Memory Address Map Appendix B I/O Information...

  • Page 62: Irq Mapping Chart

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 B.3 IRQ Mapping Chart B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 63: Digital I/O Address

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 B.5 Digital I/O Address Digital I/0 Port Address : Specified in BIOS Setup Manual (Integrated Peripherals -> Digital I/O, Port Address) Digital I/O Port Bit Mapping: Address1 bit 0 --- CN27 Pin 1 Address1 bit 1 --- CN27 Pin 2...
  • Page 64 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Appendi Mating Connecotor C - 1 Appendix C Mating Connector...

  • Page 65: Appendix C Mating Connector

    S u b C o m p a c t B o a r d G E N E - 6 3 1 5 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available...
  • Page 66 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 Front Astron 2.0mm 10pins Panel (27-24041-205-1G- Connector TB1-R or compatible) RS-232/42 CATCH 2.0mm 10pins Serial 1701100206 2/485 (1147-000-10MSP Port...
  • Page 67 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 CN16 USB1 / JIH VEI 2.0mm 10pins 1709100201 USB2 (21B22050-10S10B Cable Connector or compatible) (Support USB 2.0/ USB 1.1) CN17 USB3 /...
  • Page 68 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 CN22 Type1 SPEED N016@0140-004 or Compact TECH compatible Flash Slot CN24 RS-232 CATCH 2.0mm 10pins Serial 1701100206 Serial Port (1147-000-10MSP...
  • Page 69 S u b C o m p a c t B o a r d G E N E - 6 3 1 5 CN32 10/100 or SPEED P26@P04-1DC7 or 100/1000 TECH compatible) Base-TX Ethernet Connecto DIMM1 SDRAM 390112-1 or SODIMM compatible) Slot...

Table of Contents