Optional Network - Kyocera ECOSYS P8060cdn Operation Manual

Setup and Registration (System Menu) > System Menu
Ping
[System Menu/Counter] key > [System/Network] > [Network] > [Ping]
Item
Ping
Restart Network
[System Menu/Counter] key > [System/Network] > [Network] > [Restart Network]
Item
Restart Network

Optional Network

[System Menu/Counter] key > [System/Network] > [Optional Network]
Basic
Configure settings for the optional Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item
Host Name
TCP/IP Setting
NetWare
AppleTalk
LAN Interface
Checks if communication with the destination by entering the host name or IP
address of the destination is possible.
NOTE
If [Primary Network (Client)] is set to [Others], this item is not displayed.
Restarts the network.
Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-54)
For details on setting value.
TCP/IP Setting (page 8-36)
Bonjour (page 8-38)
IPSec (page 8-38)
Use NetWare to receive documents.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
Selects whether to receive documents using AppleTalk.
Value: Off, On
Select the LAN Interface type.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full,
1000BASE-T
NOTE
This function is displayed when the optional Network Interface Kit is installed.
8-42
Description
Description
Description
*1
*1