Kyocera ECOSYS P8060cdn Operation Manual page 343

Troubleshooting > Troubleshooting
T
Message
Regulating the
temperature...
The cover is open.
The device cannot be
connected because
allowed connections
would be exceeded.
The folding unit is
open.
The toner container is
improperly installed.
This ID card is already
registered to another
user.
Time for maintenance
soon. #####
Toner [C][M][Y][K] are
empty.
Toner is low.
[C][M][Y][K](Replace
when empty.)
Tray # is full of paper.
U
Message
Unknown Toner
Installed. PC
[C][M][Y][K]
Checkpoints
―
Is there any cover which is
open?
Are three handheld devices
connected simultaneously?
―
—
—
—
—
—
Is the acceptable storage
capacity exceeded?
Checkpoints
Does the installed toner
container's regional
specification match the
machine's?
10-32
Corrective Actions
The machine is under the
adjustment to maintain its
quality. Please wait.
Close the cover indicated on the
screen.
Cancel a connection to a
portable device that is not being
used, or set the machine's auto
disconnect time to break
portable device connections.
Close the folding unit.
The toner container is
improperly installed or not
installed.
Open the front cover and set all
the four toner containers
correctly.
Your ID card has already been
registered. Change it to another
ID card.
Call service.
Replace the toner container to
our specified toner container.
NOTE
If the color toner is empty but
the black toner is remained, the
machine continues printing in
black and white by selecting
[Print in Black and White] of
Color Toner Empty Action.
It is almost time to replace the
toner container. Obtain a new
toner container.
Remove the paper. Printing then
resumes.
Corrective Actions
Install the specified container.
Reference
Page
―
―
page 8-31
―
—
—
—
page 10-2
—
—
Reference
Page
—