Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
NOTE
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password:
6000
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
Login
Normal login
1
2
Enter the login user name and login password to login.
1
If this screen is displayed during operations, select [Login User Name] to enter the login
user name.
1
Login
abcdef
User Name
2
Login
********
Password
Character Entry Method (page 11-9)
2
[Login Password] > Enter the login password > [OK]
NOTE
•
[# Keys] can be selected to enter the number with the numeric keys on the operation
panel.
•
If user login administration is enabled, authentication destinations are displayed and
either [Local] or [Network] can be selected as the authentication destination.
•
To authenticate by ID card, select [ID Card Login].
Select [Login].
# Keys
# Keys
3
Cancel
Login
lg0301_01
2-22