Kyocera ECOSYS P8060cdn Operation Manual page 264

Setup and Registration (System Menu) > System Menu
Item
Custom Setup
Network Name (SSID)
Connection Mode
Channel
Network
Authentication
Encryption
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
The detailed settings for wireless LAN can be changed.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
NOTE
Up to 32 characters can be entered.
Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE
Ad Hoc: Directly communicates with the device without going through an access
point. This method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Select network authentication type. To select other options, open the device home
page from a computer.
Value: Open, Shared, WPA-PSK
Select encryption method. If the option other than [Disable] is selected, enter the
WEP key or the Preshared key. The setting values vary depending on the Network
Authentication setting. Select [Data Encryption].
When Network Authentication is set to [Open] or [Shared]:
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]:
*2
Value: TKIP , AES, Auto
NOTE
• If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
• If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value in 8
to 64 characters.
8-44
Description
*1 *1
, WPA2-PSK
*2
, Preshared Key