Kyocera ECOSYS P8060cdn Operation Manual page 263

Setup and Registration (System Menu) > System Menu
Item
MAC Address Filter
Restart Network
*1 The setting will be changed after restarting the device or network.
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item
Connection Status
Quick Setup
Available Network
Push Button Method
PIN Code Method
(Device)
PIN Code Method
(Terminal)
Select whether to use MAC Address Filter.
Operation Guide for the optional Network Interface Kit
Value: Off, On
Restarts the network card of the device.
You can check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Select access points to which the machine can be connected, enter the Preshared
Key and start a connection.
If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
Starts connection using the PIN code of the access point. Enter the PIN code of the
access point.
8-43
Description
Description