Optional Network - Kyocera 7002i Operation Manual

Setup and Registration (System Menu) > System Menu

Optional Network

[System Menu/Counter] key > [System/Network] > [Optional Network]
Basic
Configure settings for the optional Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item
Host Name
TCP/IP Setting
NetWare
AppleTalk
LAN Interface
MAC Address Filter
Restart Network
*1 The setting will be changed after restarting the device or network.
Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-65)
For details on setting value.
TCP/IP Setting (page 8-47)
Bonjour (page 8-53)
IPSec (page 8-53)
Use NetWare to receive documents.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
Selects whether to receive documents using AppleTalk.
Value: Off, On
Select the LAN Interface type.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full,
1000BASE-T
NOTE
This function is displayed when the optional Network Interface Kit is installed.
Select whether to use MAC Address Filter.
Operation Guide for the optional Network Interface Kit
Value: Off, On
Restarts the network card of the device.
8-58
Description
*1
*1