Creating A New Custom Box - Kyocera ECOSYS P8060cdn Operation Manual

Operation on the Machine > Using Document Boxes

Creating a New Custom Box

NOTE
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password:
• If user login administration is enabled, log in with administrator privileges to perform the following operations. They
cannot be performed with user privileges.
- Creating a box
- Deleting a box of which owner is another user.
1
2
6000
Display the screen.
1
[Home] key > [Custom Box] > [Add/Edit Box]
Register the Custom Box.
1
[Add] > Enter the information for each item > [OK]
The table below lists the items to be set.
Item
Box No. Enter the box number by selecting [+], [-] or number keys. The box
number can be from 0001 to 1000. A Custom Box should have a unique
number. If you enter 0000, the smallest number available will be
automatically assigned.
*1
Owner Set the owner of the box. Select the owner from the user list that
appears.
Box Name Enter a box name consisting of up to 32 characters.
Usage The usage for a box can be restricted. To enable a capacity restriction
Restriction enter a value for the storage capacity of the Custom Box in megabytes
by selecting [-], [+] or number keys. You can enter a limit between 1 and
30,000 (MB).
Box User access to the box can be restricted by specifying a password to
Password protect the box. Entering a password is not mandatory. Enter the same
password of up to 16 characters in both [Password] and [Confirm
Password].
This can be set if [Shared] is selected in Permission.
*2
Permission Select whether to share the box.
Auto File Automatically deletes stored documents after a set period of time.
Deletion Select [On] to enable automatic deletion and then use [+] and [-] or the
numeric keys to enter the number of days for which documents are
stored. You can enter any number between 1 and 31 (day(s)). To
disable automatic file deletion, select [Off].
Overwrite Specifies whether or not old stored documents are overwritten when
Setting new documents are stored. To overwrite old documents, select
[Permit]. To retain old documents, select [Prohibit].
Character Entry Method (page 11-9)
5-21
Description