Kyocera ECOSYS P8060cdn Operation Manual page 238

Setup and Registration (System Menu) > System Menu
Item
Printing Jobs
Text Stamp
Edit Text Stamp
Stamp
Stamp Method
Position
Font
Configure settings for stamps when a document is printed.
After configuring the setting, return to the Custom Box (Printing a Document) screen
from System Menu, and select the [Reset] key.
Select whether to print a text stamp on all printing jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed when printing.
Set the default text stamp.
Select a text string to be stamped from templates, or select [Stamp] and enter a
maximum of 32 characters for the text string.
NOTE
Templates that have been set will appear. For details on registering templates, refer
to the following:
Text (Text Stamp) (page 8-17)
Select the stamp method for the text stamp.
Value: Each Print Page, Each Original Page
Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right, Detail
NOTE
Select [Detail] to specify the detailed stamp position using numeric values, and to set
the stamp position and angle when a stamp is placed on the back side of the paper in
duplex printing.
Set the font of the text stamp.
Value
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font (Text Stamp) (page 8-17)
Character Border: Off, Circle, Rectangle, Underline
Style: None, Bold, Italic, Bold/Italic
Font: Courier, Letter Gothic
Color: Black, Red, Green, Blue, Cyan, Magenta, Yellow, White
Density: 10 to 100% (in 10% increments)
Display Pattern: Transparent, Clipping, Overwrite
8-18
Description