Optional Network; Wireless Network - Kyocera ECOSYS M6026cidn Operation Manual

Setup, Registration, and User Management > System Menu

Optional Network

NOTE
This function is displayed when the optional Network Interface Kit is installed.

Wireless Network

Item
Connection Status
Quick Setup Wizard
Available Network
Push Button Method
PIN Code
Method(Device)
PIN Code
Method(Terminal)
Custom Setup
Network Name(SSID)
Connection Mode
Channel
Network Authentication
Encryption
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
When the optional Wireless Interface Kit is installed, you can check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless network setup,
connection settings can be configured by Quick Setup.
Displays access points to which the machine can connect.
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
Starts connection using the PIN code of the access point. Enter the PIN code of the access
point.
The detailed settings for wireless LAN can be changed.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE: Up to 32 characters can be entered.
Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE: Ad Hoc: Directly communicates with the device without going through an access
point. This method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Set channel.
Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Select network authentication type.
To select other options, open the device home page from a computer.
Value: Open, Shared, WPA-PSK
Select encryption method and enter the Preshared key. The setting values vary depending on the
Network Authentication setting.
When Network Authentication is set to [Open] or [Shared]
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]
*2 *2
Value: TKIP , AES, Auto
NOTE: If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
If [Preshared Key] is selected, enter the Preshared key. Enter the value in 8 to 64
characters.
9-24
Description
*1 *1
, WPA2-PSK
, Preshared Key