Setup and Registration (System Menu) > System Menu
Item
Auto Cassette Change
Wide A4
Resolution
KIR
Printing Job Terminator
Select the following actions when the paper runs out in the paper source while
printing.
Value: Off, On
NOTE
•
When selecting [Off], the machine displays "Add the following paper in cassette
#." (# is a cassette number) or "Add the following paper in the multipurpose tray.",
and stops printing.
•
Load the paper according to the paper source displayed to resume printing.
•
To print from the other paper cassette, select [Paper Selection]. Select the
desired paper source.
•
When selecting [On], the machine continues printing automatically when the other
cassette contains the same paper as the currently-used cassette.
Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at
10 pitch). This setting is only effective in PCL6 emulation.
Value: Off, On
Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the operation
panel settings.
Select the default KIR (smoothing) setting.
Value: Off, On
You can select the condition which regarded as a job termination if the print job could
not be processed until the end due to your environment and the other reason.
Value
EOJ (End of Job): The command recognized as a termination of the job data is
regarded as one job until it is detected.
End of Network Session: The data included in a network session at network
connection is regarded as one job.
UEL (Universal Exit Language): The UEL included in the termination of the job
data is regarded as one job until it is detected.
8-26
Description