Program; Registering Programs - Kyocera ECOSYS P8060cdn Operation Manual

Operation on the Machine > Program

Program

By registering sets of frequently used functions as a single program, you can simply press the program number as
needed to recall those functions. You can also name the programs for easy identification when recalling.
NOTE
• Up to 50 functions combining printing can be registered in the program.
• If user login administration is enabled, you can only register functions by logging in with administrator privileges.

Registering Programs

The following procedure is an example of registering the printing a document stored in a Custom Box.
1
2
Display the screen.
1
[Home] key > [Custom Box]
2
Select the box containing the document you want to print.
NOTE
If a custom box is protected by a password, enter the correct password.
3
Select [Open].
4
Select the document in the list that you want to print by selecting the checkbox.
The document is marked with a checkmark.
NOTE
To deselect, select the checkbox again and remove the checkmark.
5
Select [Print].
6
Select the [Program] tab while paper selection, duplex printing, etc. are set.
Register the program.
1
[Add] > Select a number (01 to 50) for the program number > [Next]
NOTE
If you select a program number already registered, the currently registered functions can
be replaced with a new set of functions.
2
Enter the new program name > [Save]
The program is registered.
To display a registered program on the Home screen, select [Yes] on the confirmation
screen that appears, proceed to step 2-3.
3
Specify the position in which you want to display the icon of registered program.
4
Select [Save].
5-6