User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE
To use the group authorization settings, User Login Administration must be enabled in "Enabling User Login
Administration". Select "On" for "LDAP" in "Protocol Detail".
Enabling User Login Administration (page 9-3)
Protocol Settings (page 8-38)
Group Authorization
1
2
Group List (Up to 20)
Register the groups that are restricted the machine usage. Other users and groups belong to "Others".
1
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
2
"User Login Setting" [Next] > "Group Authorization Set." [Next] >
"Group Authorization" [Change]
[On] > [OK]
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
2
"User Login Setting" [Next] > "Group Authorization Set." [Next] > "Group List" [Next]
9-9