Protocol Settings - Kyocera ECOSYS P8060cdn Operation Manual

Setup and Registration (System Menu) > System Menu
Bonjour
[System Menu/Counter] key > [System/Network] > [Network] > [Bonjour]
Item
Bonjour
Wi-Fi Direct
Wi-Fi
Wired Network
IPSec
[System Menu/Counter] key > [System/Network] > [Network] > [IPSec]
Item
IPSec

Protocol Settings

[System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure protocol settings.
Item
SMTP (E-mail TX)
POP3 (E-mail RX)
ThinPrint
Wi-Fi Direct
Wi-Fi
Wired Network
Thin Print over SSL
Select whether to use Bonjour.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to use IPSec.
Value: Off, On
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[On]. The default port number is 4000.
Value: Off, On
NOTE
This function is displayed only when the ThinPrint Option is activated.
Set whether to enable this function for each network.
Value: Disable, Enable
To use the Thin Print over SSL protocol, set [Thin Print Over SSL] and [SSL] to [On].
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
8-38
Description
Description
Description
*1, *2