Service Aids; Field Programming; Table 4-2. Service Aids - Motorola APX 1000 Basic Service Manual

4-2
4.2

Service Aids

Refer to Table 4-2
this family of radios. These kits and/or parts are available from the Radio Products and Solutions
Organization offices listed in
available from Motorola, most are standard shop equipment items, and any equivalent item capable
of the same performance may be substituted for the item listed.
Motorola Part
Number
66012028001 Chassis Opener
66012031001 Battery Adapter
66012030001 Vacuum Test Fixture
NLN9839_ Vacuum Pump Kit
5880384G68 SMA to BNC Adapter
RVN5224_ Customer Programming
Software (CPS) and Tuner
Software
PMKN4012B Programming Cable
PMKN4013C Programming/Service Cable
RLN4460_ Portable Test Set
NOTE: Do not place an order for the Programming Cable (PMKN4012A/PMKN4013B) as it is not compatible
with the APX 2000/ APX 4000/ APX 4000Li radio.
4.3

Field Programming

This family of radios can be aligned and programmed in the field. This requires specific equipment
and special instructions. Refer to the online help in the Customer Programming Software (CPS) for
complete field programming information.
Recommended Test Equipment and Service Aids: Service Aids
for a listing and description of the service aids designed specifically for servicing
"Appendix B Replacement Parts Ordering"

Table 4-2. Service Aids

Description Application
To disassemble chassis from housing
Used in place of battery to connect radio to an external power
supply.
To connect the vacuum/pressure hose to the radio.
Vacuum pump with gauge and vacuum hose. Requires
Vacuum Test Fixture (66012030001).
Adapts radio's antenna port to BNC cabling of test equipment.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
To program the radio through Customer Programming
Software and Tuner Software.
To program and service the radio through Customer
Programming Software and Tuner Software.
For radio performance checks. Connects to radio's universal
connector and allows remote switching and signal injection/
outputs for test equipment measurements.
. While all of these items are