Table 5-3. Test Frequencies (Mhz) - Vhf, Uhf1, Uhf2 - Motorola APX 1000 Basic Service Manual

Apx two-way radios
Hide thumbs Also See for APX 1000:
Table of Contents

Advertisement

Performance Checks: Display Radio Test Mode
5.2.2
RF Test Mode
When the ASTRO APX 2000/ APX 4000 radio is operating in its normal environment, the radio's
microcomputer controls the RF channel selection, transmitter key-up, and receiver muting, according
to the customer codeplug configuration. However, when the unit is on the bench for testing,
alignment, or repair, it must be removed from its normal environment using a special routine, called
RF TEST MODE.
While in RF test mode:
• Each additional press of Side Button 2 advances to the next test channel. (Refer to
Table
5-3.and
• Pressing Side Button 1 scrolls through and accesses the test environments shown in
Table
5-5.
• Pressing Top Side Button scrolls through the Tx Deviation Frequency.
NOTE: Transmit into a load when keying a radio under test.
Test
Channel
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
Table
5-4)
Table 5-3. Test Frequencies (MHz) – VHF, UHF1, UHF2
VHF
RX
TX
136.075
136.025
142.075
142.125
154.275
154.225
160.175
160.125
168.125
168.075
173.925
173.975
UHF1
RX
TX
380.075
380.025
390.075
390.025
400.075
400.025
411.075
411.025
424.975
424.925
435.075
435.025
445.075
445.000
445.075005
445.000005
457.075
457.025
469.975
469.925
UHF2
RX
TX
450.075
450.025
460.075
460.025
471.075
471.025
484.925
484.975
485.075
485.025
495.075
495.025
506.075
506.025
519.925
519.975
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 2000Apx 4000Apx 4000li

Table of Contents