Figure 8-35. Assemble The Shroud; Figure 8-36. Slide Chassis Assembly Into Front Housing; Figure 8-37. Assemble Back Kit And Front Kit Together - Motorola APX 1000 Basic Service Manual

Disassembly/Reassembly Procedures: Radio Reassembly
8.6.6 Reassemble the Shroud (47)
1. Slide the Shroud (47) into the Chassis' frame until the latch clicks into place as shown in
Figure 8-35.
8.6.7 Reassemble the Main Subassemblies (A and B)
1. Complete the steps in
2. Slide the Chassis assembly into the Front Housing as shown in
3. With the Chassis assembly fully slided in, press down the bottom part of the Chassis to lock
the two subassemblies (A and B) together as shown in

Figure 8-35. Assemble the Shroud

Section 8.6.1.

Figure 8-36. Slide chassis assembly into Front Housing

Figure 8-37. Assemble Back Kit and Front Kit together

through Section 8.6.5.
Figure 8-37.
Figure 8-36.
8-25