Motorola APX 1000 Basic Service Manual page 232

7-24
3. Torque all seven Chassis Screws (15) with a Torx IP6 Bit and a Torque Driver to 3.7 in-lbf in
the sequence as shown in
7.6.5 Reassemble the Shroud (32)
1. Slide the Shroud (32) into the Chassis' frame until the latch clicks into place as shown in
Figure 7-33.
Figure 7-32.
Figure 7-32. Torque in the Keypad Retainer Screws
Figure 7-33. Assemble the Shroud
Disassembly/Reassembly Procedures: Radio Reassembly
3
6
5
1
2
7
4