8-32
8.6.8
Reassemble the Top Bezel
1. Locate the top bezel and tighten the three screws with a Torx IP8 Bit and a Torque Driver to
8 in-lbf as shown in
2. Tighten the Volume Switch nut with 8 in-lbf as shown in
Volume Switch
Spanner Nut
opener
Volume Switch
Spanner Nut
Figure 8-45.
Figure 8-45. Tighten the Screws
Figure 8-46. Tighten the Volume Switch Spanner Nut
Disassembly/Reassembly Procedures: Radio Reassembly
Figure 8-46.
2
1
3