Motorola APX 1000 Basic Service Manual page 221

Disassembly/Reassembly Procedures: Radio Disassembly
7.4.5.7 Removal of the Keypad (8)
1. With the Keypad Board (10) removed, gently press the Keypad (8) from the front of the Front
Housing (2) with fingers or with the aid of the back of the black stick to disengage the Keypad
from the rib as shown in
!
a u t i o n
Black Stick's Back
2. With the Keypad (8) disengaged from the rib, gently lift it out from the Front Housing (2).
Figure 7-18. Remove the Keypad Board
Figure 7-19.
When disengaging and removing the Keypad, care is needed
to avoid tearing and damange to the Keypad.
Figure 7-19. Disengage the Keypad
7-13