Chapter 3 Test Equipment, Service Aids, And Service Tools; Test Equipment; Table 3-1. Recommended Test Equipment - Motorola Commercial Series Basic Service Manual

Chapter 3 Test Equipment, Service Aids, and Service
Tools
3.1

Test Equipment

Table 3-1 lists test equipment required to service the CP200XLS Radios.
Motorola Part No.
R2600 series System analyzer
*R1074A Fluke 87 digital multi-
meter
Fluke 85 RF probe
*R1377A AC voltmeter
R1611A Dual channel
100 MHz
oscilloscope
(Agillent)
S1339A RF millivolt meter
*R1013B or SINAD meter or
*R1370A SINAD meter with
RMS

Table 3-1. Recommended Test Equipment

Description
This item will substitute for
items with an asterisk (*)
True RMS metering,
200 kHz frequency
counter, 32-segment bar
graph with backlit display
500 MHz, 30 VAC max
1 mV to 300 mV, 10 mega-
ohm input impedance
Two-channel, 100 MHz
bandwidth, 200 M sample
rate/sec, 2 MB memory/
channel
100 μV to 3V RF, 10 kHz to
1 GHz frequency range
Without RMS audio
voltmeter or
With RMS audio voltmeter
Characteristics Application
Frequency/deviation meter and
signal generator for wide-range
troubleshooting and alignment
Digital voltmeter is
recommended for AC/DC
voltage and current
measurements
Use with Fluke 87 digital multi-
meter for RF voltage
measurements.
Audio voltage measurements
Waveform measurements
RF level measurements
Receiver sensitivity
measurements