Motorola APX 1000 Basic Service Manual page 330

7-26
7.6.8 Reassemble the Accessory-Connector Cover (14)
1. Insert the hooked end of the cover into the pocket. Engage the hook beneath the undercut
and swing the cover down onto the radio. Ensure the cover is seated properly and the screw
is aligned into the threaded hole.
2. Hand tighten the thumb screw clockwise until secured.
NOTE: Do not overtighten the screw. The screw should be snugged and does not allow the
Figure 7-38. Engaging Hook and Seating Cover
cover to move.
Figure 7-39. Securing the Cover
Disassembly/Reassembly Procedures: Radio Reassembly
Top Hooked End
Thumb Screw
Thumb Screw with Hex Head Socket