Figure 8-25. Servicing The Multi Function Knob - Motorola APX 1000 Basic Service Manual

Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.5.3.2 Servicing Back Label
NOTE: There is no need to remove any component in order to service the Back Label.
1. Scrap off the Back Label with the Black Stick.
2. Clean the area once the Back Label is completely removed to ensure it is free of adhesive
and debris.
3. Remove the label off its backer and place it in the recess.
4. Press the label.
8.5.3.3 Servicing FM Label
NOTE: There is no need to remove any component in order to service the FM Label.
1. Scrap off the FM Label with the Black Stick.
2. Clean the area once the FM Label is completely removed to ensure it is free of adhesive and
debris.
3. Remove the label off its backer and place it in the recess.
4. Press the label.
!
a u t i o n
8.5.4 Servicing Multi Function Knob
1. Hold the radio with the top facing upward and the front of the radio facing you.
2. With the Chassis Opener, grasp the Multi Function Knob and pull it upward, until it is free from
its shaft.
3. Replace the knob with a new one by aligning the D-shaped part of the shaft with the
D-shaped hole on the Multi Function Knob. Press the knob into place.
Refer to qualified service personnel and service shops to service the FM
Label.

Figure 8-25. Servicing the Multi Function Knob

8-19