Service Aids; Field Programming - Motorola APX 1000 Basic Service Manual

4-2
4.2

Service Aids

Refer to Table 4-2
this family of radios. These kits and/or parts are available from the Radio Products and Solutions
Organization offices listed in
available from Motorola, most are standard shop equipment items, and any equivalent item capable
of the same performance may be substituted for the item listed.
Motorola Part
Number
66012028001 Chassis Opener
66012031001 Battery Adapter
5880384G68 SMA to BNC Adapter
RVN5224_ Customer Programming
Software (CPS) and Tuner
Software
PMKN4012B Programming Cable
PMKN4013C Programming/Service Cable
RLN4460_ Portable Test Set
NOTE: Do not place an order for the Programming Cable (PMKN4012A/PMKN4013B) as it is not compatible
with the APX 1000 radio.
4.3

Field Programming

This family of radios can be aligned and programmed in the field. This requires specific equipment
and special instructions. Refer to the online help in the Customer Programming Software (CPS) for
complete field programming information.
Recommended Test Equipment and Service Aids: Service Aids
for a listing and description of the service aids designed specifically for servicing
"Appendix B Replacement Parts
Table 4-2. Service Aids
Description
Ordering". While all of these items are
Application
To disassemble chassis from housing
Used in place of battery to connect radio to an external power
supply.
Adapts radio's antenna port to BNC cabling of test equipment.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
To program the radio through Customer Programming
Software and Tuner Software.
To program and service the radio through Customer
Programming Software and Tuner Software.
For radio performance checks. Connects to radio's universal
connector and allows remote switching and signal injection/
outputs for test equipment measurements.