Disassembly/Reassembly Procedures: Radio Reassembly
8.6.6
Reassemble the Shroud (60)
1. Slide the Shroud (60) into the Chassis' frame until the latch clicks into place as shown in
Figure 8-42.
8.6.7
Reassemble the Main Subassemblies (A and B)
1. Complete the steps in
2. Slide the Chassis assembly into the Front Housing as shown in
3. With the Chassis assembly fully slided in, press down the bottom part of the Chassis to lock
the two subassemblies (A and B) together as shown in
Figure 8-42. Assemble the Shroud
Section 8.6.1.
Figure 8-43. Slide chassis assembly into Front Housing
Figure 8-44. Assemble Back Kit and Front Kit together
through
Section 8.6.6.
Figure 8-44.
Figure 8-43.
8-31