Required Tools And Supplies - Motorola APX 1000 Basic Service Manual

Disassembly/Reassembly Procedures: Required Tools and Supplies
8.2

Required Tools and Supplies

Tools
Part Number
Chassis/Knob PMLN7204A
Opener
Bit, Torx T6 –
Bit, Torx T8 –
Volume Switch TL000063A01
Spanner Nut
opener
Driver, Torque –
Black Stick –
Round Stick –
Allen Wrench –
ESD Table Mat –
Vacuum Pump kit NLN9839_
Vacuum Test TL000059A01
Fixture
Vacuum Cap TL000061A01
Pressure Test TL000062A01
Fixture
Pressure Pump NTN4265_
Kit
Table 8-2. Required Tools and Supplies
Motorola
Supplier
Horizon
Land Sdn.
Bhd.
–
–
Brusia
–
Hexacon
Electric Co.
Brusia
–
–
Motorola
Brusia
Brusia
Brusia
Motorola
Supplier
Part Number
14-8973 To remove chassis and knob from housing.
– For speaker retainer, back kit (chassis) and
keypad retainer.
– For top bezel screw.
BE-MO- For Volume Switch Spanner Nut.
143828
– –
MA-800G For keypad rubber mushroom rib assembly
and disassembly.
BE-MO-14383 For microphone membrane assembly.
– To loosen accessory-connector cover thumb
screw (if thumb screw is too tight).
– To place radio and components during
disassembly and reassembly.
– For vacuum test.
BE-MO- To connect the vacuum/pressure hose of the
141326 Vacuum Pump Kit to the radio.
VP6RSE To enhance sealing when the vacuum test
fixture is connected to the radio.
BE-MO- To connect the vacuum/pressure hose of the
143143 Pressure Pump Kit to the radio.
– For pressure test.
Remarks
8-3