Digital (Astro) Mode Of Operation; Controller Section - Motorola APX 1000 Basic Service Manual

Apx two-way radios
Hide thumbs Also See for APX 1000:
Table of Contents

Advertisement

3-8
3.3

Digital (ASTRO) Mode of Operation

In the ASTRO (digital) mode of operation, the transmitted or received signal is limited to a discrete
set of frequency deviation levels. The receiver handles an ASTRO-mode signal identically to an
analog-mode signal, up to the point where the DSP decodes the received data. In the ASTRO
receive mode, the DSP uses a different algorithm to recover data.
In the ASTRO transmit mode, microphone audio is processed identically to an analog mode, with the
exception of the algorithm the DSP uses to encode the information. Using this algorithm, transmitter
FM deviation is limited to discrete levels.
3.4

Controller Section

The controller section
boards, which are the main and keypad boards. The main functional section consists of a dual core
ARM and DSP controller, an encryption processor (MACE), Flash memory, and a Double Data Rate
Synchronous Dynamic Random Access Memory (DDR SDRAM) and CPLD for GPIO expander
multiple clock generation and SSI interface for the radio system. The Power and Clocks section
includes a power management IC (MAKO) and various external switching regulators, and three clock
sources (12 MHz and 24.576 MHz) from which all other controller digital clocks are derived. The
Audio section has a CODEC and a class-D audio power amplifier that provides the radio with a
microphone and speaker design. The User Interface section provides communication and control to
the main Liquid Crystal Displays (LCD) on the radio, as well as a keypad and a side connector
interface conforming to GCAI (Global Communications Accessory Interface) specifications. The GPS
and Bluetooth section comprises of a Global Positioning Satellite(GPS) and Bluetooth combo chipset
on the main board, and an AVR Bluetooth controller IC, SDRAM, LF wakeup IC and Accelerometer
IC on the keypad board. The MACE IC is located on the keypad board.
Battery Supply
POWER & CLOCKS
Clock sources:
12MHz,
24.576Mhz,
32.768kHz
Voltage Regulators
USER INTERFACE
Main Display
Keypad
Side connector
Top Controller
Basic Theory of Operation: Digital (ASTRO) Mode of Operation
(See Figure
3-9.) comprises of five functional sections that are split among two
CONTROLLERS & MEMORY
ARM Processor
Digital Signal Processor
Flash Memory
DDR Memory
Encryption Processor
BT,GPS and Encryption
Keypad Board (full version)
MACE
Bluetooth
Accelerometer
GPS (on main board)
Figure 3-9. Controller Block Diagram
Transceiver
AUDIO
Data Microphone
Audio PA/ Speaker
Main Microphone
Acc. Speaker
Acc. Microphone

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 2000Apx 4000Apx 4000li

Table of Contents